PLC构成电梯控制系统特性分析

分析了电梯的负载特性,阐述了采用梯形加速曲线的电梯理想速度曲线,结合变频器和PLC的性能,论述了电梯控制系统的构成和工作特性,以及电梯速度曲线产生的方法,归纳了由PLC构成的控制系统软件设计的特点。     

能谱变硬后的X射线对Ly12铝破坏效应的研究

用数值模拟方法讨论了X射线的能谱向短波方向变化后,对Ly12铝破坏效应的影响,对所得结果进行了分析和解释。     

B／Al单向铺层复合板的力学性能及断裂行为的研究

研究了热压扩散结合工艺对Ｂ／Ａｌ复合材料的强度的影响,并对试样拉伸断口及断裂径进行了研究,分析表明,试样断口有三种断裂模型,断裂路径同热压工艺有密切的关系。     

Load distribution strategy for multi-lift system with helicopters based on power consumption and robust adaptive game control

It is of great significance to reasonably distribute the slung load to each helicopter while considering difference in power consumption, relative position and interaction comprehensively. Therefore, the load distribution strategy based on power consumption and robust adaptive game control is proposed in this paper. The study is on a “2-lead” multi-lift system of four tandem helicopters carrying a load cooperatively. First, based on the hierarchical control, the load distribution problem is divided into two parts: the calculation of expected cable force and the calculation of the anti-disturbance cable force. Then, aimed at minimizing the maximum equivalent power of helicopter, an optimization problem is set up to calculate the expected cable force. Specially, the agent power model is trained by BP neural network, the safe distance constraint between helicopters is set to 2.5 rotor diameters to reduce aerodynamic interference, and the helicopters with different performance can be considered by introducing the equivalent power factor into the objective function. Next, considering the difference and interaction between helicopters, the robust adaptive differential game control is proposed to calculate the anti-disturbance cable force. Particularly, to solve the coupled Hamiltonian equations, an adaptive solving method for value function is proposed, and its stability is proved in the sense of Lyapunov. The simulation results indicate that the proposed load distribution method based on power consumption is applicable to the entire flight trajectory even there are differences between helicopters. The game control can consider interaction between helicopters, can deal with different objective functions, and has strong robustness and small steady-state error. Based on the entire strategy, the cable force can be reasonably allocated so as to resist disturbance and improve the flight performance of the whole system.     

小孔节流动静压混合式浮动环密封承载与泄漏特性分析

为了解决传统浮动环密封存在的摩擦磨损问题,提出一种采用小孔节流的动静压混合式浮动环密封(HFRS)。核心是通过创新设计将密封介质从径向节流孔引入密封界面,使密封间隙内的流体膜同时具有静压和动压承载效应,显著提升浮动环密封承载性能而不需要外部条件。为了研究其承载和泄漏特性,建立了考虑入口压力损失和节流孔影响的HFRS承载力模型和泄漏量计算方法。采用有限差分法(FDM)及数值迭代程序计算流场压力分布,并分析获得转速、偏心率和密封介质压力对承载力、刚度、偏位角和泄漏量的影响规律。与传统直孔式浮动环密封(FRS)对比,在典型工况下（偏心率ε=0.5、转速Ω=20000r/min）,HFRS的承载力是FRS的2.53倍,且在低速甚至转速为零时HFRS仍具有较大的承载力,另一方面HFRS的泄漏量比FRS大5.4%。与FRS对比结果表明,HFRS的承载力显著提升,而泄漏量略有增大。     

塑性动态断裂过程中梁的塑性铰转动因子的确定方法

运用理论分析方法和实测试验方法，探讨了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律，提出了断裂过程中塑性铰几何转动因子的概念及其确定方法，并以３点弯曲梁理论分析解为例，计算了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律。该计算结果与３点弯曲梁动态断理解实验实测相一致。理论分析进一步明确了梁的塑性铰转动因子具有几何与物理两种不同的本质含意，并可直接用于修正梁的塑性动态断裂的理论分析解。     

美国MTS公司应用软件在测试上的应用

介绍了用美国ＭＴＳ公司的平面应变断裂韬度测试软件，对ＴＣ４合金进行ＫＩＣ测试的过程及结果。     

超高强铝合金LC9的超塑性研究

工业牌号超高强铝合金LC9经过两种不同方式的预处理后,在一定的温度和应变速率范围内呈现出良好的超塑性。材料经过形变热处理(TMT)后,在最佳超塑性条件下拉伸(T_(TMT)=515℃,ε_(TMT)=1.66×10~(-3)s~(-1)),获得很高的延伸率δ_(TMT)=1300％,低的流变应力σ_(TMT)=1.7MPa和高的应变速率敏感性指数m_(TMT)=0.66。经过简单锻造预处理后,在最佳超塑条件下(T_f=405℃、ε_f=1.66×10~(-3)s~(-1)),材料仍能获得δ_(f)=380％、σ_(f)=16MPa、m_(f)=0.3。TMT预处理中,η相粒子分布状态对获取微细组织起着决定性作用,η相的回溶降低了材料的空洞敏感性,抑制试样早期断裂。经过两种方式预处理的试样超塑性断裂形式分别为空洞型失稳断裂和颈缩型稳定断裂。     

复合材料在DCB试验中的裂纹尺寸效应

在许多关于复合材料Ⅰ型层间断裂韧性试验研究工作中，不同的作者所选取的有效裂纹长度有很大的差异，由此带来试验结果分散程度很大，试验结果无法相互比较等问题。本文对复合材料在Ⅰ型层间断裂ＤＣＢ试验中裂纹的预裂长度、裂纹尖端形状以及裂纹测量误差等问题进行了研究。     

位置同步补偿克服负载模拟器干扰力矩及提高系统频宽的理论与实验研究

本文介绍一种通过位置同步补偿克服飞行器负载模拟器的干扰力矩及提高系统频宽的新方法。建立了位置同步补偿电液负载模拟器的数学模型，并进行了实验分析